How to Hide Soundbar Wires?

Soundbars are a great way to add some extra audio punch to your home theater system, but they can also be a pain to hide if you want to keep the wires hidden.

Here are different ways to learn about how to hide soundbar wires.

1. Hide Soundbar Wires Behind the TV

Hiding soundbar wires behind the TV can be done in a few ways.

The wires can be hidden by using a soundbar that is wireless, by hiding the wires behind the television or inside the wall, or by using an HDMI cable.

If using a wireless soundbar, there are no wires to worry about. If hiding the wires behind the television or inside the wall, make sure to measure and cut the wires to the correct length.

2. Hide Soundbar Wires in the Wall

There is no need to be embarrassed by your soundbar anymore! With a little bit of creativity, you can hide the wires in the wall and nobody will ever know they are there.

A) The first method is to use an electrical box. This is a box that is designed to cover up wires, and it can be found at any hardware store.

The first step is to cut a hole in the wall where you want your soundbar to be. Then, take the electrical box and fit it over the hole.

Next, feed the wires through the hole in the back of the box and screw it into place on the wall. Finally, put your soundbar in place and plug it in!

B) The second method is a little bit easier, but it requires some drilling. This method will work with a soundbar that has a power button on the back.

The first step is to cut a hole in the wall where you want your soundbar to be.

Then, take a look at the soundbar and find where the wires are coming out of it. Cut a small square out of the wall.

Then, put your soundbar in place and plug it in! If you don’t have access to a drill, you can get more creative with this method.

3. Hide Soundbar Wires in the Ceiling

No one wants to see wires running across their living room ceiling. Luckily, there is an easy way to hide them. All you need is a few pieces of molding and some paint.

  1. First, cut a piece of molding that is the same width as your soundbar.
    It should be at least twice as long as the soundbar itself. If your soundbar is 36” long, you’ll need a piece of molding that is 72” long.
  2. Next, cut a piece of molding that is the same width as your TV. It should be about 12” long. Paint both pieces of molding the same color as your ceiling.
  3. Attach the longer piece of molding to the top of your soundbar using screws or nails.
  4. Then, attach the shorter piece of molding to the bottom of your soundbar, using screws or nails.
  5. Finally, attach both pieces of molding to your TV using screws or nails. This will create a wall that hides all of your wires.

4. Hide Soundbar Wires Under the Carpet

Soundbars have become a popular way to improve the sound quality of your TV, but they can be unsightly and take up valuable space.

One way to hide the wires is to tuck them under the carpet. This can be done by threading them through the crevices in the baseboard and securing them with tape or a staple gun. You can also use a cable cover or tube to hide the wires.

5. Hide Soundbar Wires with a Cabinet

TVs and soundbars have become thinner and thinner over the years, leaving less and less room for speakers. This has resulted in the need to mount the soundbar on the wall or hide it inside the cabinet.

While there are many ways to hide the soundbar wires, one of the best ways is to use a cabinet.

There are many different types of cabinets that can be used to hide wires. The most important thing is to find a cabinet that is big enough to fit the soundbar and all of its wires.

Another thing to consider is the location of the power outlet. The cabinet should be close enough to an outlet so that all of the wires can reach.

Once a cabinet has been chosen, it is time to start hiding those wires!

  1. The first step is to remove all of the doors and shelves from the cabinet. This is to allow for the wiring to be run inside of the cabinet.
  2. Next, it is time to start hiding all of those wires. The most common way to hide wires is with zip-ties.
    These can easily be found at any local hardware store. Zip-ties are great because they are very easy to hide and a variety of colors can be used for customizing the cabinet.
  3. The next step is to run the wires through the cabinet. This can be done by running the wire into one of the inside compartments and then using a wire clip to secure the wires in place.
  4. The wires from different components should be separated. This will help to prevent anyone component from affecting another.

6. Hide Soundbar Wires with a Shelf

Adding a soundbar to your home theater system is a great way to improve the quality of your audio experience. However, if you’re not careful, the unsightly wires can ruin the look of your setup.

A simple way to hide them is to use a shelf. This can be attached directly to the wall above or below your TV, or even built into the furniture itself.

By doing this, you’ll have a sleek and professional-looking home theater system that’s easy to use and maintain.

7. Hide Soundbar Wires Under the Couch

If you’re like most people, you have a soundbar sitting in your entertainment center.

It likely makes your movies and TV shows sound better, but it also probably has a few unsightly wires running across the top of your TV. You may have to hide them under the couch.

8. Hide Soundbar Wires with a Cover

If you’re like me, you probably have a soundbar sitting in front of your TV. It’s a great way to improve the quality of your audio, but the wires can be a bit of a pain.

You can try to hide them behind the TV or around the room, but they always seem to find a way to show themselves.

A great solution is to use a soundbar cover. These covers fit right over the top of your soundbar and hide all of the wires.

They come in a variety of colors and styles, so you can find one that matches your décor. Plus, they’re easy to install and remove when you need to access the wires.

9. Hide Soundbar Wires with a Mount

Today, one of the biggest challenges in home entertainment is hiding all the cords and wires.

Mounting a soundbar to the wall is a great way to clean up the look of your entertainment center and hide the unsightly wires.

10. With a Cable Management System

A cable management system can help to hide those wires and make your living room look a lot cleaner.

There are a few different types of cable management systems available, so you can choose the one that best suits your needs.

If you want something that is simple and inexpensive, you can use cable wrap or cable ties. These products are easy to use and they will keep your cables neatly organized.

If you’re looking for something more sophisticated, you might want to consider a cable box or cord organizer. These products are designed to hide the cables behind your TV or furniture.

Conclusion

In conclusion, there are several ways to hide soundbar wires. Choose the method that best suits your needs and lifestyle. Be sure to measure the space before purchasing any products to ensure a proper fit. And lastly, have fun with your new soundbar!

Similar Posts