|

How to Connect Samsung Soundbar to subwoofer Without Remote?

One of the perks of a soundbar is that it can provide quality sound for your television without the need for a lot of cables and wires.

In many cases, you simply need to connect the soundbar to your TV’s HDMI port.

However, if you want to get the most out of your soundbar, you may also want to connect it to a subwoofer. This can give you richer bass tones and a more immersive audio experience.

If you’ve just purchased a new Samsung soundbar and are looking to connect it to your subwoofer, you may be wondering how to do so without the remote control.

It’s actually a relatively simple process and can be done with just a few basic tools.

In this article, you will learn about how to connect Samsung soundbar to subwoofer without remote.

5 Ways to Connect Samsung Soundbar to a Subwoofer Without Remote

There are a few ways that you can connect your Samsung soundbar to your subwoofer without the remote.

1. By using included cables

When you set up your Samsung soundbar, you may be wondering how to connect the soundbar to the subwoofer. If you don’t have the remote, don’t worry – there is a way to do it without it.

First, make sure that both devices are turned off. Next, connect the cables. On the back of the subwoofer, there should be a port for audio input and a port for audio output.

Match up the ports on each device and connect them with the cables. Once they’re connected, turn on both devices and enjoy your new sound system!

2. By infrared repeater

If you have misplaced or lost your soundbar’s remote, don’t worry – there is still a way to connect it to your subwoofer. All you need is an infrared repeater.

An infrared repeater is a small device that emits an infrared signal from your soundbar remote control. This signal is then received by the repeater, which in turn sends it to the subwoofer.

To set up an infrared repeater,

  1. First, identify the port on the back of your soundbar that connects to the subwoofer. This will most likely be an optical port.
  2. Next, find an open port on the back of your subwoofer and plug in the repeater.

3. By using an HDMI cable

Sending audio and video signals over a single cable is the primary function of HDMI. This is why it is the preferred connection for devices such as televisions, projectors, and soundbars.

When connecting a Samsung soundbar to a subwoofer without a remote, there are several things to consider.

  1. The first step is to determine which ports are available on each device.
  2. The soundbar should have an HDMI port while the subwoofer can have either an HDMI port or a 3.5mm audio input jack.
  3. If an HDMI cable is not available, then use a 3.5mm audio cable to connect the two devices.
  4. Once the cables are connected, power on both devices and adjust the volume levels on each one until they are at an acceptable level.
  5. Some soundbars have a built-in subwoofer while others do not.

How to Manually Connect Soundbar With Subwoofer?

If you want to connect a soundbar to a subwoofer, you may be wondering if there is a specific way to do it. The good news is that there is no one right way to do it- it depends on the equipment you are using.

In this section, we will show you two methods for manually connecting a soundbar with a subwoofer.

Method 1: Using RCA Cable

The first method is to use an RCA cable. This is the most common way to connect devices, and it is usually used for audio equipment.

To use this method, you will need an RCA cable that is long enough to reach from your soundbar to your subwoofer. Once you have the cable, follow these steps:

  1. Plug one end of the RCA cable into the “Subwoofer Out” port on your soundbar.
  2. Plug the other end of the RCA cable into the “Subwoofer In” port on your subwoofer.
  3. Connect your subwoofer to your soundbar using the front speaker wires.

Method 2: Using Optical Cable

The second way to connect a subwoofer is to use an optical cable. This type of cable has a small light that shines different colors. The colors indicate the signal strength, which helps you navigate through your system.

  1. Start by connecting the subwoofer to your soundbar.
  2. Connect one end of the optical cable to the “Subwoofer Out” port on your soundbar.
  3. Connect the other end of the optical cable to the “Subwoofer In” port on your subwoofer.
  4. Connect your subwoofer to your soundbar using the front speaker wires.

How to Automatically Connect Soundbar With Subwoofer

One way to connect a soundbar to a subwoofer is by using an automatic connection system. This system will connect the soundbar and subwoofer without the need for a remote.

  • The first step is to make sure that both the soundbar and subwoofer are turned on.
  • Next, connect the soundbar to the TV using an HDMI cable.
  • Finally, connect the subwoofer to the wall outlet. The soundbar and subwoofer will automatically connect once they are both turned on.

How to Sync Samsung Subwoofer to Soundbar Without Remote?

If you want to sync your Samsung subwoofer to your soundbar without using the remote, there are a few ways you can do it. 

One way is to use the Samsung Audio Remote app. The app is available for free on both Android and iOS devices. With the app, you can control the volume and bass levels of your soundbar and subwoofer. 

Another way to sync your devices is by using a common household item- a tissue box! Cut off one end of the box and make two small holes in opposite corners.

Then, take the end of the soundbar cable that plugs into the wall and put it through one of the holes. Take the other end of the cable and put it through the other hole.

How to Pair Samsung App to Soundbar

You can connect your Samsung soundbar to a subwoofer without using the remote control.

  1. First, make sure both the soundbar and subwoofer are turned off.
  2. Connect the cables from the soundbar to the subwoofer.
  3. Turn on the soundbar and subwoofer.
  4. Press the “Sound” button on the soundbar to open the Sound menu.
  5. Use the arrow buttons to select “External Speaker” and press OK.
  6. Select “Subwoofer” and press OK.
  7. Select the subwoofer to which you are connecting and press OK.
  8. Press “OK” on the soundbar to close the menu.
  9. Turn off the soundbar and subwoofer, then turn them back on again.
  10. The subwoofer will now be controlled by the soundbar.

How to Turn on Soundbar Bluetooth

The soundbar is a versatile piece of equipment that can be used to improve the quality of your television’s sound. It can also be used to create an immersive audio experience for movies and gaming. In this section, we’ll show you how to turn on the soundbar’s Bluetooth feature. 

If you want to use the soundbar’s Bluetooth feature, you’ll need to make sure that it’s turned on. To do this, press and hold the Bluetooth button on the remote control for three seconds.

The blue light on the front of the soundbar will start flashing, and it will be ready to pair with a Bluetooth device. 

To pair the soundbar with a Bluetooth device, press the Pairing button on the device. The name of the soundbar should appear on your screen. Tap on it to connect.

Similar Posts